Manually Update Your Apple Device to latest [iOS Ver-7.0.4]

  Manually  Update Your Apple Device to latest [iOS Ver-7.0.4]

The Apple Corporation has Just released a 7.0.4 update for their Iphone and Ipod products which is going to fix a major Face Time bug. It is true that Apple has never let down their yester-year Flagships, In contrast Samsung has always let down thier flagships, if it is firmware update or rolling out delay, which is somehow dissappointing. 

Anyhow in Apple's case they never do stuff like that. So there is a new update ver 7.0.4 which is avilable at some websites. I am gonna show you how to update your Iphone 4 or 5 to the latest version.

                    Note: Backup Your Phone Before Following Steps

Inorder to do that, One will have to do the following steps.

1. First of all head over to THIS link inorder to download your desired product.
2. Head over to the THIS link to download latest iTunes.
3. Open up iTunes and connect your phone, that it may install necessary drivers.
4. It will search for a new update for your phone, just leave it, it will close eventually.
5. From there click on your product, up above in the right corner.Sync Your phone with the iTunes by clicking Sync in the right bottom corner.

1. [Backup Iphone Button], Will backup up your phone, incase if something goes wrong your phone will be restored right away.
2. [Restore Iphone Button], Clicking on it will search for latest update for your iphone and will take much time depending on your Internet connection speed to download the update and install it.
3.  If you're on a Mac, hold the "Option" key and click on "Restore" on iTunes. From there, a window will pop up; browse for the iOS firmware you'd like to install on your iOS device from within that window. When the correct .ipsw firmware file is found, open the file.
4. If you're on a PC, hold the "Shift" key and click "Restore" on iTunes. From there, a window will pop up; browse for the iOS firmware you'd like to install on your iOS device from within that window. It's most likely saved in your "Downloads" folder, unless you changed the destination folder before downloading it. When the correct .ipsw firmware file is found, open the file.
5. Note: Incase you forget your Lock-code[start-up phone and hold power+home button until phone restarts, when phone restarts let go power button and keep holding home button] i logo with usb cable and iTunes will appear on the phone screen.
6. ITunes will detect it in recory Mode. Then Head to step 3 OR 4.
7. Click Restore button and you are good to go.
8.  iTunes may ask you to backup your device; if this happens, click on "Restore from the backup of:" and choose the most recent backup of your device and click on "Continue". iTunes will then restore your device with all the settings, music, apps, etc. that were on the device before you started the initial restore to another iOS version.

Congratulations! You have Updated Your Phone.

                 Posts Your Questions in the comments section if you have any.

 

GT-N7100 Latest 4.3 Update [OFFICIAL] [October 2013]

  GT-N7100 Latest 4.3 update [OFFICIAL] [October  2013]

The latest update rolled out for GT-N7100 was lately released in October 2013.

      Due to high traffic on hotfile website, it is very difficult to download it from hotfile, so I have uploaded it to the pcloud server and am providing you people the link which is really fast and ADs free.

             To update your GT-N7100 phone to  Jelly Bean 4.3 just follow these following steps.

First the Download Part.

1. Download Odin from this link Here.
2. Download Samsung Usb Drivers for Windows from Here.
3. Download Latest Jelly Bean 4.3 November update form Here.
4. Download Winrar 32 bits Extractor from Here.
5. Download Winrar 64 bits Extractor from Here.

Now the Installation Part

1. Install Winrar if you don't have One.
2. Install The Samsung Usb Drivers [Works with both 32 & 64 bits].
3. Extract the Update .zip File.
4. Extract Odin v3.09
5. Open Up Odin v3.09
6. Click on AP in Odin as in image1.
7. Browse the unzipped .tar update file in Odin.
   
   
   

Now the Phone Part.

1. When Phone is either OFF or ON when ON it will First Shutdown, then Press Power Button+Volume down+Home Button all at once when the samsung Gt-N7100 logo appears once, then let go the power button and Keep holding the Volume down+Home Button.
2. Now a Black screen with yellow text will appear and will show Download Mode.
3. Just press volume up button and it will show Downloading ...
4. Now connect the USB Cable.
5. Now wait at least 2 minutes that windows install the download drivers.
6. Now Match the Odin screen with this image 2 which will show that Phone is connected. 

Now that all checks are ticked Just click the Start Button in Image 3.

If You Get Any Problem other than BootLoop, Post it in the Comments.
Incase You get a BootLoop[ phone going to the samsung Screen and Restarting ] follow these steps.

1. Press Power Button+Volume Up Button+Home Button either phone is OFF or ON.
2. When Samsung GT-N7100 logo appears twice then let go power button.
3. Now you are in Recovery Mode.
4. Use Power Button for Selection and Volume up and Volume Down for Movement in recovery Mode.
5. Wipe Data and Factory reset.
6. Wipe Cache Partition
7. Reboot The phone and you are Good to Go.

    Note: Only Install Roms Intended for Your Phone Model or You will SuperBrick Your Phone. Also this Update will Erase Your Phone Memory Contacts and Installed Applications if and only if you are Coming from a Custom Rom or From Stock ICS or GingerBread.

SuperNote:This Update will Completely Erase Your Phone Including Your Internal SDCARD and will Allocate Round-about 7.45 GBs for System to run Smoothly.
Post your Questions if You Have Any.

GT-I9100 Latest 4.1.2 update [Bugs Free] [November 2013]

  GT-I9100 Latest 4.1.2 update [Bugs Free] [November 2013]

Rumours are all around that there will be no Jelly Bean 4.2.2 or Jelly Bean 4.3 updates rolling out for GT-I9100. Although it has been updated to Jelly Bean 4.1.2. So according to this limitation we will have to stick to 4.1.2 latest updates to improve performance of our phones. The Jelly Bean 4.1.2 updates rolling out are new and bugs free.

The latest update rolled out for GT-I9100 was lately released in November 2013.

      Due to high traffic on hotfile website, it is very difficult to download it from hotfile, so I have uploaded it to the pcloud server and am providing you people the link which is really fast and ADs free.

             To update your GT-I9100 phone to  Jelly Bean 4.1.2 just follow these following steps.

First the Download Part.

1. Download Odin from this link Here.
2. Download Samsung Usb Drivers for Windows from Here.
3. Download Latest Jelly Bean 4.1.2 November update formHere.
4. Download Winrar 32 bits Extractor from Here.
5. Download Winrar 64 bits Extractor from Here.

Now the Installation Part

1. Install Winrar if you don't have One.
2. Install The Samsung Usb Drivers [Works with both 32 & 64 bits].
3. Extract the Update .zip File.
4. Extract Odin v3.09
5. Open Up Odin v3.09
6. Click on AP in Odin as in image1.
7. Browse the unzipped .tar update file in Odin.
   
   
   

Now the Phone Part.

1. When Phone is either OFF or ON when ON it will First Shutdown, then Press Power Button+Volume down+Home Button all at once when the samsung Gt-i9100 logo appears once, then let go the power button and Keep holding the Volume down+Home Button.
2. Now a Black screen with yellow text will appear and will show Download Mode.
3. Just press volume up button and it will show Downloading ...
4. Now connect the USB Cable.
5. Now wait at least 2 minutes that windows install the download drivers.
6. Now Match the Odin screen with this image 2 which will show that Phone is connected. 

Now that all checks are ticked Just click the Start Button in Image 3.

If You Get Any Problem other than BootLoop, Post it in the Comments.
Incase You get a BootLoop[ phone going to the samsung Screen and Restarting ] follow these steps.

1. Press Power Button+Volume Up Button+Home Button either phone is OFF or ON.
2. When Samsung GT-i9100 logo appears twice then let go power button.
3. Now you are in Recovery Mode.
4. Use Power Button for Selection and Volume up and Volume Down for Movement in recovery Mode.
5. Wipe Data and Factory reset
6. Wipe Cache Partition
7. Reboot The phone and you are Good to Go.

    Note: Only Install Roms Intended for Your Phone Model or You will SuperBrick Your Phone. Also this Update will Erase Your Phone Memory Contacts and Installed Applications if and only if you are Coming from a Custom Rom or From Stock ICS or GingerBread.
 
Post your Question if You Have Any.